BXadmin:Network/Galaxy

Initial Configuration

Galaxy has its own subnet, this is the configuration that was done to create it:

asa

ciscoasa(config)# access-list Outside_access_in extended permit ip any 128.118.250.0 255.255.255.224 
ciscoasa(config)# route Bioinformatics 128.118.250.0 255.255.255.224 172.28.90.18 1
ciscoasa(config)# nat (Bioinformatics) 1 172.18.0.0 255.255.240.0
ciscoasa(config)# route Bioinformatics 172.18.0.0 255.255.240.0 172.28.90.18 1

switch-cisco-3750-1

switch-cisco-3750-1(config)#int vlan 140
switch-cisco-3750-1(config-if)#description GALAXY_PUBLIC
switch-cisco-3750-1(config-if)#no ip address
switch-cisco-3750-1(config-if)#exit
switch-cisco-3750-1(config)#int vlan 270
switch-cisco-3750-1(config-if)#description GALAXY_PRIVATE
switch-cisco-3750-1(config-if)#no ip address
switch-cisco-3750-1(config-if)#exit
switch-cisco-3750-1(config)#ip route 128.118.250.0 255.255.255.224 10.1.7.2
switch-cisco-3750-1(config)#ip route 172.18.2.0 255.255.255.0 10.1.7.2

Also, established connections to

172.18.0.0 0.0.15.255

had to be added to the inbound access-list.

switch-dell-powerconnect-6248-1

switch-dell-powerconnect-1(config)#vlan database 
switch-dell-powerconnect-1(config-vlan)#vlan 140
Warning: The use of large numbers of VLANs or interfaces may cause significant
delays in applying the configuration.
switch-dell-powerconnect-1(config-vlan)#vlan 270
Warning: The use of large numbers of VLANs or interfaces may cause significant
delays in applying the configuration.
switch-dell-powerconnect-1(config-vlan)#exit
switch-dell-powerconnect-1(config)#interface vlan 140 
switch-dell-powerconnect-1(config-if-vlan140)#name "GALAXY_PUBLIC"
switch-dell-powerconnect-1(config-if-vlan140)#ip address 128.118.250.1 255.255.255.224
switch-dell-powerconnect-1(config-if-vlan140)#routing
switch-dell-powerconnect-1(config-if-vlan140)#no ip redirects
switch-dell-powerconnect-1(config-if-vlan140)#exit
switch-dell-powerconnect-1(config)#interface vlan 270
switch-dell-powerconnect-1(config-if-vlan270)#name "GALAXY_PRIVATE"
switch-dell-powerconnect-1(config-if-vlan270)#ip address 172.18.2.1 255.255.255.0
switch-dell-powerconnect-1(config-if-vlan270)#routing
switch-dell-powerconnect-1(config-if-vlan270)#no ip redirects
switch-dell-powerconnect-1(config-if-vlan270)#exit
switch-dell-powerconnect-1(config)#interface port-channel 2
switch-dell-powerconnect-1(config-if-ch2)#switchport general allowed vlan add 140,270 tagged
Warning: The use of large numbers of VLANs or interfaces may cause significant
delays in applying the configuration.
switch-dell-powerconnect-1(config-if-ch2)#exit
switch-dell-powerconnect-1(config)#interface port-channel 4
switch-dell-powerconnect-1(config-if-ch4)#switchport general allowed vlan add 140 tagged
Warning: The use of large numbers of VLANs or interfaces may cause significant
delays in applying the configuration.
switch-dell-powerconnect-1(config)#interface port-channel 1
switch-dell-powerconnect-1(config-if-ch1)#switchport general allowed vlan add 270 tagged
Warning: The use of large numbers of VLANs or interfaces may cause significant
delays in applying the configuration.

switch-hp-procurve-8.net.bx.psu.edu

switch-hp-procurve-8(config)# vlan 270
switch-hp-procurve-8(vlan-270)# name GALAXY_PRIVATE
String GALAXY_PR... too long. Allowed length is 12.
switch-hp-procurve-8(vlan-270)# name GALAXY_PRIV
switch-hp-procurve-8(vlan-270)# tagged trk1
switch-hp-procurve-8(vlan-270)# exit

bigsky

# touch /etc/hostname.aggr140001
# ifconfig aggr140001 plumb
# zonecfg -z main-web1
zonecfg:main-web1> add net
zonecfg:main-web1:net> set physical=aggr140001
zonecfg:main-web1:net> set address=128.118.250.4/27
zonecfg:main-web1:net> end
zonecfg:main-web1> verify
zonecfg:main-web1> commit
zonecfg:main-web1> exit
# ifconfig aggr140001 addif 128.118.250.4/27 zone main-web1
# ifconfig aggr140001:1 up

TODO: default route change in zonecfg?