Difference between revisions of "BXadmin:Power"
From CCGB
(→PDUs) |
(→PDUs) |
||
| Line 5: | Line 5: | ||
= PDUs = | = PDUs = | ||
{{Power/PDU/header| | {{Power/PDU/header| | ||
| + | |||
| + | {{Power/PDU/entry | ||
| + | | pdu = PDU-3 | ||
| + | | ups = plugged into outlet CRP2-9 | ||
| + | }} | ||
{{Power/PDU/entry | {{Power/PDU/entry | ||
| Line 10: | Line 15: | ||
| rack = Rack 3 | | rack = Rack 3 | ||
| ups = UPS-8 | | ups = UPS-8 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
}} | }} | ||
| Line 23: | Line 23: | ||
{{Power/PDU/entry | {{Power/PDU/entry | ||
| − | | pdu = PDU- | + | | pdu = PDU-20 |
| − | | ups = UPS- | + | | ups = UPS-8 |
}} | }} | ||
{{Power/PDU/entry | {{Power/PDU/entry | ||
| − | | pdu = PDU- | + | | pdu = PDU-21 |
| − | | ups = UPS- | + | | ups = UPS-7 |
}} | }} | ||
{{Power/PDU/entry | {{Power/PDU/entry | ||
| − | | pdu = PDU- | + | | pdu = PDU-23 |
| − | | ups = | + | | ups = UPS-14 |
}} | }} | ||
Latest revision as of 12:58, 13 September 2012
Contents
Panels
UPSes
PDUs
| PDU | UPS | Rack |
| PDU-3 | plugged into outlet CRP2-9 | ? |
| PDU-18 | UPS-8 | Rack 3 |
| PDU-19 | UPS-8 | ? |
| PDU-20 | UPS-8 | ? |
| PDU-21 | UPS-7 | ? |
| PDU-23 | UPS-14 | ? |
Measurements
Conversions used:
- 1 watt = 3.41214 BTU/h
- 1 ton = 12,000 BTU/h
Therefor, 1 ton = 3516.854 watts
Jun 02, 2010
These measurements were performed by OPP area electricians on June 2, 2010.
Panel CRP
- A = 0
- B = 0
- C = 0
- VA_total = 0
Panel CRP2
- A = 55A
- B = 45A
- C = 60A
- VA_total = 19200VA
Panel P509
- A = 1.7A
- B = 11A
- C = 12.6A
- VA_total = 3036VA
Panel SB5
- A = 10A
- B = 42A
- C = 37A
- VA_total = 10680VA
VA was calculated assuming Line-Neutral voltage of 120V, and assuming no neutral current.
Room 509 VA_total = 32916 VA
Assuming VA = W (PF should not affect heat dissipation)...
- Room 509 BTU/h = 112309 BTU/h
- Room 509 tons = 9.36 tons
June 09, 2011
'NOTE:' Many of the numbers in []'s (the currents) are estimates, and others are subject to changed based on machine workload. Numbers that were observed directly were taken from the no-load steady-state condition.
- RACK-1 = 3680W
- PDU-18[8+5 @208] -> UPS-13 -> SB5/14-16 = 2704W
- ((zeus[3.4 @120 + pc9[.5 @120]) -> PDU-14) + mulligan[3 @120] + jayne[1 @120]) -> UPS-12 = 940W
- RACK-2 = 2260W
- (ift-1 + comandra) -> PDU-19 -> UPS-15 -> P509/5-7 = 1000W
- xraid[2 @120] -> UPS-9 = 240W
- (herbie[3 @120] + pc4[.5 @120] + horvitz[3 @120] + tortuga[2 @120]) -> UPS-10 = 1020W
- RACK-3 = 3536W
- (galaxy nodes + pc8) -> PDU-20[11+6 @208] -> UPS-8 -> SB5/15-17 = 3536W
- RACK-4 = 5158W
- (PDU-21[8+11 @208] + thumper[5.8 @208])-> UPS-7 -> SB5/21-23 = 5158W
- RACK-5 = 5784
- 12*dell_nodes[2] -> PDU-17[@120] = 2880W
- (1/2md1k-big[4] + 1/2s1-array[2] + 1/2md1k-1[2] + 1/2md1k-4[2] + 1/2md1k-5[2] + 1/2c14[1.6]) -> UPS-5[@120] = 1632W
- (c8[2] + foundry[.5] + pc7[.5] + 1/2s1-array[2] + 1/2md1k-4[2] + 1/2md1k-6[2] + 1/2c14[1.6]) -> UPS-6[@120] -> CRP2-16 = 1272W
- RACK-6 = 8970W
- (node007..node012)[6*1.5] -> PDU-6 -> CRP2-11 = 1080W
- (node001..node006)[6*1.5] -> PDU-7 = 1080W
- (node013 + node014 + node015..node018)[6*1.5] -> PDU-8 -> CRP2-1 = 1080W
- (node025..node032)[8*1.5] -> PDU-9 -> CRP2-14 = 1440W
- (node019..node024)[6*1.5] -> PDU-10 = 1080W
- (1/2lux[1] + 1/2s2[1] + 1/2s3[1] + 1/2md1k-3[2] + 1/2linne[.75] + 1/2xraid[1]) -> UPS-2[@120] = 810W
- (1/2xraid[1] + 1/2s2[1] + 1/2s3[1] + 1/2lux[1] + 1/2md1k-3[2] + 1/2md1k-2[2]) -> UPS-3 = 960W
- (1/2md1k-2[2] + 1/2md1k-1[2] + 1/2md1k-5[2] + 1/2md1k-6[2] + 1/2md1k-big[4]) -> UPS-4 = 1440W
- RACK-7 = 8940W
- (okinawa[4] + switch[.5]) -> PDU-4[@120] -> UPS-1 = 540W
- (9 okinawa nodes)[9*4] -> PDU-5[@120] -> P509/6-8 = 4320W
- (7 okinawa nodes)[7*4] -> PDU-22[@120] -> CRP2/15-17 = 3360W
- (huck md1k[4] and PE2850[2]) -> CRP2/11[@120] = 720
- RACK-8 = 624W
- PDU-23[2+1 @208] -> UPS-14 -> P509/9-11 = 624W
TOTAL = 38952W = 11.08 tons If we subtract linne (5760W = 1.63 tons), that number comes down to 33192W = 9.44 tons. Currently half of linne is powered down, meaning we're currently using ~10.3 tons.
machine current reference
- zeus = 1.7A x2 @120V
- carbonite promise sata RAID = 0.75A x2 @120V
- carbonite = 3.7A x2 @120V
- v880 2/3 power supplies, 3 CPU boards = ~5A x2 @120V
- v210 = .12A standby, 1.5A idle, 1.7A pk @120V
(10) PE 1950 - 2x Quad Core 2.83GHz, 16GB RAM, 146GB 15K 3.5" SAS, 1 PS
powered off - 0.26A @120V pk, 0.16A @120V avg
OS running, no load - 1.85A @120V pk, 1.73A @120V avg
OS running, make -j32 - 2.73A @120V pk, 2.25A @120V avg
(32) linne darwin compute node
powered off - 0.20A @120V pk, 0.10A @120V avg
OS running, no load - 1.40A @120V pk, 1.15A @120V avg
OS running, forked du -hs /scratch - 1.83A @120V pk, 1.65A @120V avg
(2) Xserve RAID
7.6A/3.6A
(4) MD1K - 12x 3.5" SATA
2x C13
2.00A @208V
Foundry EdgeIron
48W (.4A@120, .2A@208)
(10) Okinawa and compute nodes, 8x Xeon
4.0A@120, 2.0A@208
SunFire 480R - 2x 1.2GHz US3+, 8GB (pilica)
3.2A@120
StorEdge 3300
1.5A@120
OptiPlex GX240 (minidb)
3/1.5 ?
(10) PowerEdge 2650 (galaxy cnode)
2.5A@120, 1.25A@208
PE 2950 - 8x2.83GHz, 32gb, 6x 3.5" SATA (baker)
4A/2A
PE 2950 - 8x2.83GHz, 32gb, 4x 2.5" SAS (badger)
3.74A/1.87A
PE 2970 - 8xAMD 2356, 16gb, 6x 3.5" sata (apollo)
3.3A/1.65A
IBM x3550 - 4x3.0GHz Xeon 5160, 32gb (atlas)
~3A/1.5A ?
(2) IBM x3550 - 8x3.16GHz Xeon 5460, 32gb (c10, c11)
~4A/2A ?
IBM x3550 - 4x2.66GHz Xeon 5150, 32gb (frisell)
~3A/1.5A ?
Relion 230 - 4x2.8GHz Xeon, 2gb, 6x 3.5" PATA (horvitz)
~3/1.5A ?
Relion 140 - 4x2.8GHz Xeon, 3gb, 1x 146GB U320 scsi (tortuga)
~2A/1A ?
Altus 3150 - 2xAMD 250, 4gb, bunch o' sata (herbie)
~3A/1.5A ?
Relion 2000 - 4x2.8GHz Xeon, 4gb, 3ware 9500s-8 (8 3.5" sata) (scofield)
~3/1.5 ?
Altus 1300 - 2xAMD 256, 8gb, 2x 3.5" sata (mulligan)
~3/1.5 ?
IBM x3455 - 4x AMD 2218, 4gb, ? (coltrane)
~3/1.5 ?
IBM DS4200 - 8x 3.5" SATA, 2x 4Gb FC RAID
~4/2 ?
Sun x4540 (thumper)
10/5.8
