BXadmin:Solaris notes

Because this isn't entirely obvious.

In this case, we have two interfaces, bge0 and bge1.

Host has addresses 128.118.200.78 and 2610:8:7800:14::32/64.

/etc/hosts

::1 localhost
127.0.0.1 localhost
128.118.200.78 inara.bx.psu.edu inara

/etc/hostname.bge0

inara group production up

/etc/hostname.bge1

group production up

/etc/hostname6.bge0

group production -failover up
addif 2610:8:7800:14::32/64 up

/etc/hostname6.bge1

group production -failover up

Now for the trick to make this work if you're running autoconf on your network. If you don't do both of these, in.ndpd will configure an ADDRCONF interface after a failover/failback, resulting in two public IPv6 interfaces - the statically configured one and the autoconf'd one. No manner of ifconfig commands will remove that autoconf'd address.

/etc/inet/ndpd.conf

ifdefault StatelessAddrConf off

Then run:

$ svccfg -s routing/ndp:default setprop routing/stateless_addr_conf=false # makes in.ndpd run with -a
$ svcadm restart ndp